Clear Ballistic Gel Torso
This Clear Ballistic Gel Torso is the next generation of ballistic testing dummies. This special is the first-ever reusable commercially available ballistic testing dummy. The torso is made of our industry leading synthetic ballistic gelatin and meets the FBI protocol for calibrating ballistic gelatin to match human tissue. The design of matches an athletic male in great physical condition. This Clear Ballistic Gel Torso is perfect for all types of testing with any ammunition, weapons, personal armor, shields, or any other protection equipment. It will also allow you to test all types of shrapnel penetrations. This torso will give you insight into ballistic data you could never achieve from standard ballistic gelatin due to its physical limitations. Not only will you be able to gain standard terminal ballistics data, but you can now get penetrating and non-penetrating ballistic data from the same device simultaneously. After performing all your tests, you can take the torso back to the lab and analyze all of his wounds, which is impossible with traditional gelatin. The torso is three dimensional on the front and both sides, and his back is completely flat. The Clear Ballistic Gel Torso sits vertically or lies horizontally for all types of testing. It measures from top to bottom 20 inches in height, 9 inches front to back, and his shoulders are the widest part of his body measuring 18 inches wide from the outermost edges. He has a rectangular base near his hips that measures 9 inches from front to back by 4 inches in height by 11 inches in from hip to hip. He weighs 72 pounds. Joe’s sides contour to the familiar V-shape of an athlete. The arms are just long enough to provide as placeholders for all types of tactical vests but not too long to be cumbersome to get equipment on and off quickly. It's neck is two inches in height to help anchor all equipment at the top. The torso is reusable with our specially designed molding system. This revolutionary molding system combines high-end plastic forming technology with high-quality silicone. The mold’s main structure is composed of 3/16 inch thick polycarbonate, which can hold 500 lbs. per square inch. Plus one can of 770-NC Mold Release Agent.
